MIC2005-0.8YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 70mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 800mA |
| Base Part Number | MIC2005 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 800mA |
| Nominal Supply Current | 330μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005-0.8YM6-TR Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the SOT-23-6 package.Surface Mount is the mounting type of the LED driver.General Purpose is the switch type it owns.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board operates at Not Required volts.A maximum output voltage of P-Channel volts can be achieved by this LED driver.The lighting driver has Slew Rate Controlled features.It belongs to the MIC2005 family.It is necessary to use the 6 pins in order to operate the LED driver.In terms of output, the lighting driver can provide a maximum of 800mA V.As a result, the maximum output current is reduced to 800mA in order to meet the operation requirements.As a result, it is mounted in the manner of Surface Mount.There is 70mOhm resistance on the LED driver.The total number of channels is 1.Voltage input is limited to 5.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.For stable operation, the maximum operating temperature is 85°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.It can operate at low supply voltages, such as 2.5V volts.
MIC2005-0.8YM6-TR Features
Resistance of 70mOhm
1 channels
MIC2005-0.8YM6-TR Applications
There are a lot of Microchip Technology MIC2005-0.8YM6-TR Power Switches ICs applications.
- Notebook PC
- Portable/Handheld Devices
- Portable Music Players
- HDD, SSD
- Wireless Modem Data Cards
- Smartphone and PDA
- Low Voltage I/O System Power
- Smart Phones, Feature Phones
- Wireless Headsets
- Portable GPS
