MIC2005-0.8YM6TX
| Parameters | |
|---|---|
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 6 |
| Subcategory | Power Management Circuits |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Base Part Number | MIC2005 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Power Supplies | 5V |
| Interface | On/Off |
| Current - Output (Max) | 800mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Supply Current-Max (Isup) | 0.33mA |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 70m Ω |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
MIC2005-0.8YM6TX Overview
Tape & Reel (TR) is how it's packaged.This package is included in SOT-23-6.In this case, the LED driving board is mounted as Surface Mount.It owns the General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of P-Channel volts at its maximum output.There are Slew Rate Controlled features available on the LED driving board.It is a member of the MIC2005 family.In total, there are 6 terminations.The lighting driver's maximum output is 800mAV.High efficiency is possible at 5V supply voltage.A self-contained container with a capacity of Power Management Circuits contains this lighting driver.There is a voltage supply of 5V volts on this part.The maximum supply current for the LED driver is 0.33mA when it is operating.
MIC2005-0.8YM6TX Features
Supplied from 5V
MIC2005-0.8YM6TX Applications
There are a lot of Microchip Technology MIC2005-0.8YM6TX Power Switches ICs applications.
- Storage (HDDs, SSDs)
- Low Voltage I/O System Power
- USB Protection
- Wearable Devices
- Hot Swaps
- Handheld Devices
- Hot-Swap Systems
- Portable GPS
- Portable Devices
- Portable Video Game Players
