Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SC-74A, SOT-753 |
Number of Pins |
5 |
Supplier Device Package |
SOT-23-5 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
170mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Current Rating |
500mA |
Base Part Number |
MIC2005A |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
500mA |
Number of Channels |
1 |
Interface |
On/Off |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Current - Output (Max) |
500mA |
Nominal Supply Current |
300μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.5 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature |
Rds On (Typ) |
170mOhm |
Height |
1.3mm |
Length |
2.9mm |
Width |
1.75mm |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2005A-1YM5-TR Overview
As a result, it is packaged in the form of a Tape & Reel (TR).It is included with the SC-74A, SOT-753 package as well.The lighting driver has the mounting type Surface Mount.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.As a default, the output is set to 1.The LED driving board operates with a supply voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.The MIC2005A family consists of this type.For operation, we use the 5 pins.This lighting driver is capable of delivering a maximum output of 500mA volts.To meet the operation criteria, the maximum output current drops to 500mA.As a result, it is mounted in the manner of Surface Mount.The LED driver has 170mOhm resistance.In total, 1 channels are available.A maximum input voltage of 5.5V volts can be applied to it.It requires 2.5V volts as the minimum input voltage.The maximum operating temperature of 85°C°C allows for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.Supply voltages as low as 2.5VV are possible.
MIC2005A-1YM5-TR Features
Resistance of 170mOhm
1 channels
MIC2005A-1YM5-TR Applications
There are a lot of Microchip Technology MIC2005A-1YM5-TR Power Switches ICs applications.
- Hot Swaps
- Wearable Devices
- Notebook PC
- Portable GPS
- Portable GPS Device
- USB Power Distribution
- Portable Devices
- Wireless/Networking Cards
- Hot-Swap Systems
- PDAs