MIC2005A-1YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 170mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2005A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 170mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005A-1YM6-TR Overview
It is packaged in the manner of a Tape & Reel (TR).It's included in the SOT-23-6 package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.It is possible to use 1 outputs in the lighting driver.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of P-Channel volts.It belongs to the MIC2005A family.It is necessary to use the 6 pins in order to operate the LED driver.This lighting driver is capable of delivering a maximum output of 500mA volts.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.The LED driver has 170mOhm resistance.Its maximum input voltage is 5.5V volts.There is a minimum input voltage of 2.5V volts for this LED driver.The maximum operating temperature of 85°C°C allows for stable operation.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.It can handle a voltage of 5.5VV as its maximum supply voltage.It can work with as low a supply voltage as feasible, such as 2.5VV.
MIC2005A-1YM6-TR Features
Resistance of 170mOhm
MIC2005A-1YM6-TR Applications
There are a lot of Microchip Technology MIC2005A-1YM6-TR Power Switches ICs applications.
- PDAs
- HDD and SSD
- Portable/Handheld Devices
- Hot-Swap Systems
- Gaming
- Wireless Modem Data Cards
- Various applications equipped with buttons
- Set-top-box
- Hot Swap
- Low Voltage I/O System Power
