MIC2005A-2YM5-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Number of Pins | 5 |
| Supplier Device Package | SOT-23-5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 220MOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2005A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 170mOhm |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005A-2YM5-TR Overview
It is packaged in the manner of a Tape & Reel (TR).The SC-74A, SOT-753 package includes it.Surface Mount is the mounting type of the LED driver.There is a switch type of General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 1 outputs.It uses a supply voltage of Not Required to operate.The maximum output voltage of this LED driver is P-Channel volts.I believe it belongs to the MIC2005A family.5 pins are used for operation.There is a maximum output of 500mAV from the LED driver.To comply with the operation criteria, the maximum output current is reduced to 500mA.Surface Mount is mounted in the way of this lighting driver.It has 220MOhm resistance.There are a total of 1 channels available.This LED driver can handle voltages up to 5.5V volts.The minimum input voltage is 2.5V volts.For stable operation, the maximum operating temperature should be 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.1 inputs are provided.
MIC2005A-2YM5-TR Features
Resistance of 220MOhm
1 channels
MIC2005A-2YM5-TR Applications
There are a lot of Microchip Technology MIC2005A-2YM5-TR Power Switches ICs applications.
- Storage (HDDs, SSDs)
- PC Cards
- Portable/Handheld Devices
- PDAs
- Portable GPS
- USB3.1 Power Delivery
- Hot Swap
- Hot Swap
- Mobile Communication Devices
- Gaming
