MIC2005A-2YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 275mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2005A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Rds On (Typ) | 170mOhm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2005A-2YM6-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the SOT-23-6 package.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.By default, it is set to output 1.Operation is based on a supply voltage of Not Required.The maximum output voltage is P-Channel volts.This object belongs to the MIC2005A family.The operation is performed through the 6 pins.The maximum output of the LED driving board is 500mAV.This results in the maximum output current dropping to 500mA to meet the operation criteria.Surface Mount is mounted in the way.In this LED driving board, there is 275mOhm resistance.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.
MIC2005A-2YM6-TR Features
Resistance of 275mOhm
MIC2005A-2YM6-TR Applications
There are a lot of Microchip Technology MIC2005A-2YM6-TR Power Switches ICs applications.
- USB3.1 Power Delivery
- USB Ports/Hubs
- Hard Disk Drives
- Portable Music Players
- Storage Drives
- Set-Top Boxes
- Storage (HDDs, SSDs)
- Hot Swap
- Solid State Drivers
- Notebook and Tablet Computers
