MIC2007YM6-TR
| Parameters | |
|---|---|
| Resistance | 70mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 2A |
| Base Part Number | MIC2007 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | P-Channel |
| Max Output Current | 2A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 2A |
| Nominal Supply Current | 330μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 70mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Feature | Load Discharge, Slew Rate Controlled |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
MIC2007YM6-TR Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).There is a SOT-23-6 package that includes it.This lighting drivere has a mounting type of Surface Mount.The switch type is General Purpose.To ensure reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver is equipped with 1 outputs.A supply voltage of Not Required is required for it to operate.The maximum output voltage is P-Channel volts.A lighting driver with Load Discharge, Slew Rate Controlled features is available.This object belongs to the MIC2007 family.The 6 pins are used to operate the LED driver.In this case, the LED driving board can produce only 2AV as its maximum output.The maximum output current is reduced to 2A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.Currently, the LED driving board has 70mOhm resistance.Its maximum input voltage is 5.5V volts.It has a 2.5V volt minimum input voltage.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It can operate at 2.5V volts as well.
MIC2007YM6-TR Features
Resistance of 70mOhm
MIC2007YM6-TR Applications
There are a lot of Microchip Technology MIC2007YM6-TR Power Switches ICs applications.
- Portable GPS
- Hot-Swap Systems
- Low Voltage I/O System Power
- Portable Music Players
- Set-Top Boxes
- Various applications equipped with buttons
- Notebook PC
- HDD and SSD
- Smart Phones, Feature Phones
- Set-top-box
