MIC2009A-2YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 170mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2009A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 900mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 900mA |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 170mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2009A-2YM6-TR Overview
As you can see, it's packaged in the way of a Tape & Reel (TR).It is included with the SOT-23-6 package as well.This lighting drivere has a mounting type of Surface Mount.It owns General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.The LED driver is equipped with 1 outputs.To operate, it needs a supply voltage of Not Required.A maximum output voltage of P-Channel volts has been specified.It is part of the MIC2009A family of LED drivers.In order to operate, the 6 pins are used.The lighting driver's maximum output is 900mAV.The maximum output current is reduced to 900mA to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.It has a resistance of 170mOhm.The maximum input voltage of the LED driver is 5.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.As a result, it is only capable of handling voltages up to 5.5VV.A supply voltage of 2.5VV is sufficient for it to work.It has 1 inputs.
MIC2009A-2YM6-TR Features
Resistance of 170mOhm
MIC2009A-2YM6-TR Applications
There are a lot of Microchip Technology MIC2009A-2YM6-TR Power Switches ICs applications.
- Hard Disk Drives
- Mobile Communication Devices
- USB Protection
- HDD, SSD
- Smartphone and PDA
- Hot Swap
- Wireless Modem Data Cards
- Portable Music Players
- USB Ports/Hubs
- USB Power Distribution
