Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Supplier Device Package |
SOT-23-6 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2011 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
70mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Base Part Number |
MIC2009 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
P-Channel |
Max Output Current |
2A |
Number of Channels |
1 |
Interface |
On/Off |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Current - Output (Max) |
2A |
Nominal Supply Current |
330μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.5 ms |
Switch Type |
General Purpose |
Min Input Voltage |
2.5V |
Max Input Voltage |
5.5V |
Nominal Input Voltage |
5.5V |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature |
Rds On (Typ) |
70mOhm |
Height |
1.3mm |
Length |
2.9mm |
Width |
1.75mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2009YM6-TR Overview
The package is in the form of a Tape & Reel (TR).Package SOT-23-6 contains it.This LED driving board is mounted using the mounting type Surface Mount.The switch type is General Purpose.Ensure reliable operation by setting the temperature to -40°C~85°C TA.It is possible to use 1 outputs in the lighting driver.It uses a supply voltage of Not Required to operate.It has a maximum output voltage of P-Channel volts.I believe it belongs to the MIC2009 family.In order to operate, the 6 pins are used.This lighting driver is capable of delivering a maximum output of 2A volts.It is necessary to reduce the maximum output current to 2A to meet the operation criteria.The LED driving board is mounted in the way of Surface Mount.70mOhm resistance is present in the lighting driver.In total, there are 1 channels available.It has a maximum input voltage of 5.5V volts.A voltage of 2.5V volts is the minimum input voltage.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 5.5VV.Alternatively, 2.5V volts can be used if needed.
MIC2009YM6-TR Features
Resistance of 70mOhm
1 channels
MIC2009YM6-TR Applications
There are a lot of Microchip Technology MIC2009YM6-TR Power Switches ICs applications.
- Notebook PC
- Wearable Devices
- Set-Top Boxes
- Set-top-box
- HDD, SSD
- Portable Music Players
- Wireless/Networking Cards
- USB Power Distribution
- USB Protection
- PC Card Hot Swap