MIC2016-1.2YM6
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Bulk |
| JESD-609 Code | e3 |
| Feature | Slew Rate Controlled |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | MIC2016 |
| JESD-30 Code | R-PDSO-G6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | P-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.5V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 1.2A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | YES |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 70m Ω |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
MIC2016-1.2YM6 Overview
The LED driver's packaged as a Bulk.It is included with the SOT-23-6 package as well.Mounting type Surface Mount is selected for the LED driving board.A General Purpose switch type is owned by it.Ensure reliable operation by setting the temperature to -40°C~85°C TA.There are 1 outputs available on this lighting driver.Operation is based on a supply voltage of Not Required.Voltage output is P-Channel volts at maximum.This LED driving board is equipped with Slew Rate Controlled features in order for it to be useful.It comes under the family of MIC2016.It has a total of 6 terminations.The LED driver has 1 functions.This lighting driver is capable of delivering a maximum output of 1.2A volts.A supply voltage of 5V leads to high efficiency.In this LED driver, the maximum supply voltage is configured to be 5.5V (Vsup).In order to operate normally, the supply voltage (Vsup) must be maintained above 2.5V.The analog IC used in this lighting driver is POWER SUPPLY SUPPORT CIRCUIT.You can select from 1 channels.
MIC2016-1.2YM6 Features
Supplied from 5V
1 channels
MIC2016-1.2YM6 Applications
There are a lot of Microchip Technology MIC2016-1.2YM6 Power Switches ICs applications.
- PC Card Hot Swap
- Hot-Swap Systems
- USB3.1 Power Delivery
- Handheld Devices
- Solid-State Drives
- Wireless Headsets
- HDD, SSD
- Portable GPS
- USB Power Distribution
- Various applications equipped with buttons
