MIC2019A-1YM6-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 170mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2019A |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 900mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 900mA |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Over Temperature |
| Rds On (Typ) | 170mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2019A-1YM6-TR Overview
Tape & Reel (TR) is how it's packaged.It is included with the SOT-23-6 package as well.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver has a total of 1 outputs.Operation is based on Not Required supply voltage.The maximum output voltage of this LED driver is P-Channel volts.It is a member of the MIC2019A family.6 pins are used for operation.Its maximum output voltage is 900mAV.It is necessary to reduce the maximum output current to 900mA to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.Lighting drivers with 170mOhm resistance are used.It has a maximum input voltage of 5.5V volts.As far as input voltage goes, it has a minimum of 2.5V volts.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.In terms of supply voltage, it is capable of handling a maximum of 5.5V volts.It can also be used at 2.5Vvolts if needed.1 inputs are available.
MIC2019A-1YM6-TR Features
Resistance of 170mOhm
MIC2019A-1YM6-TR Applications
There are a lot of Microchip Technology MIC2019A-1YM6-TR Power Switches ICs applications.
- Wireless Headsets
- Notebook PC
- USB3.1 Power Delivery
- Portable Devices
- Set-Top Boxes
- HDD and SSD
- Portable Music Players
- Hot Swap
- Wireless Modem Data Cards
- Hot Swap
