MIC2025-1YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2025 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Load Current | 500mA |
| Rds On (Typ) | 90mOhm |
| Drain to Source Resistance | 140mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2025-1YM Overview
As you can see, it's packaged in the way of a Tube.There is a 8-SOIC (0.154, 3.90mm Width) package that includes it.Mounting type Surface Mount is selected for the LED driving board.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There are 1 outputs available on this lighting driver.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.It comes under the family of MIC2025.It is necessary to use the 8 pins in order to operate the LED driver.The LED driver output is limited to 500mAV.To meet the operation criteria, the maximum output current drops to 500mA.Surface Mount is mounted in the way.In this LED driving board, there is 90mOhm resistance.This electrical component is part of the MM8? series.A total of 1 channels are available for you to choose from.Voltage input is limited to 5.5V volts.The input voltage minimum is 2.7V volts.A maximum operating temperature of 85°C°C is required for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.If required, it can operate at 2.7V volts as well.
MIC2025-1YM Features
Resistance of 90mOhm
1 channels
MIC2025-1YM Applications
There are a lot of Microchip Technology MIC2025-1YM Power Switches ICs applications.
- Wireless Modem Data Cards
- Hot Swap
- HDD, SSD
- Portable Video Game Players
- Portable Devices
- Notebook PC
- USB Ports/Hubs
- Wireless Headsets
- Telecom and Network Systems
- PDAs
