banner_page

MIC2025-1YM-TR

N-Channel PMIC MM8? Series MIC2025 8 Pin 5V 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2025-1YM-TR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 595
  • Description: N-Channel PMIC MM8? Series MIC2025 8 Pin 5V 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Max Output Current 500mA
Number of Channels 1
Interface On/Off
Analog IC - Other Type POWER SUPPLY SUPPORT CIRCUIT
Nominal Supply Current 750nA
Output Configuration High Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Adjustable Threshold NO
Input Type Non-Inverting
Turn On Delay Time 2.5 ms
Switch Type General Purpose
Rise Time 2.3ms
Fall Time (Typ) 50 μs
Nominal Input Voltage 5.5V
Turn-Off Delay Time 50 μs
Ratio - Input:Output 1:1
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Number of Drivers 1
Rds On (Typ) 90m Ω
Ambient Temperature Range High 85°C
Height 1.73mm
Length 4.93mm
Width 3.94mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Manufacturer Package Identifier SOICN-8LD-PL-1
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2010
Series MM8™
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 140mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Current Rating 1.25A
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MIC2025
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel

MIC2025-1YM-TR Overview


Tape & Reel (TR) is the way it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).The lighting driver is mounted in the Surface Mount position.The switch type of this switch is General Purpose.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.By default, it is set to output 2.A supply voltage of Not Required is required for it to operate.Voltage output is N-Channel volts at maximum.A lighting driver with Slew Rate Controlled, Status Flag features is available.As you can see, it comes from the MIC2025 family.It consists of 8 terminations in total.The operation is carried out using the 8 pins.Currently, the lighting driver has a total of 1 functions.It is necessary to reduce the maximum output current to 500mA to meet the operation criteria.Using a voltage of 5V allows for high efficiency.The lighting driver is mounted in the way of Surface Mount.In this LED driving board, there is 140mOhm resistance.This electrical component is part of the MM8? series.It is set to 500mA in this case.In this case, a digital IC is used, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 available channels.The part has 1 drivers.

MIC2025-1YM-TR Features


Supplied from 5V
Resistance of 140mOhm
1 channels

MIC2025-1YM-TR Applications


There are a lot of Microchip Technology MIC2025-1YM-TR Power Switches ICs applications.

  • HDD, SSD
  • HDD and SSD
  • USB3.1 Power Delivery
  • Portable/Handheld Devices
  • USB Power Distribution
  • USB Power Distribution
  • Portable Devices
  • Smart Phones, Feature Phones
  • Hard Disk Drives
  • Notebook and Tablet Computers

Write a review

Note: HTML is not translated!
    Bad           Good