MIC2025-1YMM-TR
| Parameters | |
|---|---|
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2025 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
MIC2025-1YMM-TR Overview
The package is in the form of a Tape & Reel (TR).It is included in the package 8-TSSOP, 8-MSOP (0.118, 3.00mm Width).The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.There are 2 outputs available on this lighting driver.With a supply voltage of Not Required, the LED driving board operates.The maximum output voltage of this LED driver is N-Channel volts.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It is part of the MIC2025 family of LED drivers.In order to operate, the 8 pins are used.In terms of output, the lighting driver can provide a maximum of 500mA V.The maximum output current must drop to 500mA to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.It has 140mOhm resistance.This electrical component can be found in the MM8? series.A maximum operating temperature of 85°C°C is required to provide stable operation.It operates at a minimum working temperature of -40°C degrees Celsius to ensure reliability.The greatest supply voltage it can handle is 5.5VV.It can also be used at 2.7Vvolts if needed.
MIC2025-1YMM-TR Features
Resistance of 140mOhm
MIC2025-1YMM-TR Applications
There are a lot of Microchip Technology MIC2025-1YMM-TR Power Switches ICs applications.
- Telecom and Network Systems
- Solid-State Drives
- USB Power Distribution
- Notebook PC
- Storage (HDDs, SSDs)
- USB Protection
- PC Card Hot Swap
- Notebook and Tablet Computers
- Portable Devices
- Gaming
