MIC2025-2YM
| Parameters | |
|---|---|
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2004 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2025 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Load Current | 500mA |
| Rds On (Typ) | 90mOhm |
| Drain to Source Resistance | 140mOhm |
| Height | 1.63mm |
MIC2025-2YM Overview
The package is in the form of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver has the mounting type Surface Mount.General Purpose is the switch type it owns.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The lighting driver is equipped with 1 outputs that can be used.In order to operate, it requires a voltage supply of Not Required.A maximum output voltage of N-Channel volts has been specified.It has a total of Slew Rate Controlled, Status Flag features.It is a member of the MIC2025 family.For operation, we use the 8 pins.The LED driver output is limited to 500mAV.The maximum output current drops to 500mA in order to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.The LED driver has 140mOhm resistance.This electrical component is included in the MM8? series.A total of 1 channels are available for you to choose from.A maximum input voltage of 5.5V volts can be applied to it.Input voltage must be at least 2.7V volts.For stable operation, the maximum operating temperature is 85°C°C.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.Supply voltages as low as 2.7VV are possible.
MIC2025-2YM Features
Resistance of 140mOhm
1 channels
MIC2025-2YM Applications
There are a lot of Microchip Technology MIC2025-2YM Power Switches ICs applications.
- Wireless Headsets
- Hot Swap
- Handheld Devices
- Notebook PC
- Portable Devices
- PC Cards
- HDD and SSD
- Set-top-box
- USB Protection
- Gaming
