MIC2026-1BM
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2026 |
| Number of Outputs | 2 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Drain to Source Resistance | 140mOhm |
| REACH SVHC | No SVHC |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
MIC2026-1BM Overview
The LED driver's packaged as a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.The lighting driver is mounted in the Surface Mount position.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.The LED driver has 2 outputs.With a supply voltage of Not Required, the LED driving board operates.There is a maximum output voltage of N-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.The MIC2026 family contains this object.The operation is performed through the 8 pins.There is a maximum output of 500mAV from the LED driver.The maximum output current is reduced to 500mA to meet the operation criteria.In this case, it is mounted in the way of Surface Mount.90mOhm resistance is present in the lighting driver.The total number of channels is 2.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.
MIC2026-1BM Features
Resistance of 90mOhm
2 channels
MIC2026-1BM Applications
There are a lot of Microchip Technology MIC2026-1BM Power Switches ICs applications.
- Handheld Devices
- Portable/Handheld Devices
- Wearable Devices
- Hot-Swap Systems
- USB Power Distribution
- PC Cards
- Telecom and Network Systems
- Portable GPS Device
- Storage (HDDs, SSDs)
- Portable Music Players
