MIC2026-1BN
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90m Ω |
| RoHS Status | Non-RoHS Compliant |
MIC2026-1BN Overview
The package is in the form of a Tube.This file is included in package 8-DIP (0.300, 7.62mm).This LED driving board is mounted using the mounting type Through Hole.It owns General Purpose switch type.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 2 outputs.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts can be achieved by this LED driver.Slew Rate Controlled, Status Flag features are available on the lighting driver.A total of 8 terminations can be found in it.As far as the lighting driver is concerned, there are 1 functions.The LED driver output is limited to 500mAV.A supply voltage of 5V leads to high efficiency.The LED driver has a total of 8 pins.Vsup (maximum supply voltage) is set to 5.5V.This LED driving board uses an analog IC POWER SUPPLY SUPPORT CIRCUIT.We currently have 2 channels available.
MIC2026-1BN Features
Supplied from 5V
2 channels
MIC2026-1BN Applications
There are a lot of Rochester Electronics, LLC MIC2026-1BN Power Switches ICs applications.
- Wireless/Networking Cards
- Set-top-box
- Various applications equipped with buttons
- Hot Swap
- Wireless Headsets
- Wireless Modem Data Cards
- Wearable Devices
- Storage Drives
- Set-Top Boxes
- Hot Swaps
