MIC2026-2BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Number of Channels | 2 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90m Ω |
| Height Seated (Max) | 1.73mm |
| Length | 4.93mm |
| Width | 3.94mm |
| RoHS Status | Non-RoHS Compliant |
MIC2026-2BM Overview
Tube is how it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.The switch type is General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The lighting driver is equipped with 2 outputs that can be used.The LED driving board operates with a supply voltage of Not Required.The maximum output voltage of this LED driver is N-Channel volts.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It contains 8 terminations.As far as the lighting driver is concerned, there are 1 functions.This LED driver has a maximum output of 500mAV.Supply voltages of 5V allow for high efficiency.As a result, it has a total of 8 pins.In this case, Vsup (maximum supply voltage) is set to 5.5V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.To choose from, there are 2 channels.
MIC2026-2BM Features
Supplied from 5V
2 channels
MIC2026-2BM Applications
There are a lot of Rochester Electronics, LLC MIC2026-2BM Power Switches ICs applications.
- Wireless Headsets
- Hard Disk Drives
- Hot Swap
- Portable GPS
- Storage (HDDs, SSDs)
- Smartphone and PDA
- Hot Swaps
- Wireless Modem Data Cards
- Handheld Devices
- USB Protection
