banner_page

MIC2026-2YM

N-Channel PMIC MIC2026 8 Pin 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2026-2YM
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 272
  • Description: N-Channel PMIC MIC2026 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel
Max Output Current 500mA
Number of Channels 2
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 2.7V
Current - Output (Max) 500mA
Nominal Supply Current 20μA
Output Configuration High Side
Output Current 500mA
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 5 ms
Switch Type General Purpose
Min Input Voltage 2.7V
Max Input Voltage 5.5V
Nominal Input Voltage 5.5V
Turn-Off Delay Time 100 μs
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Load Current 500mA
Rds On (Typ) 90mOhm
Drain to Source Resistance 140mOhm
Ambient Temperature Range High 85°C
Height 1.73mm
Length 5mm
Width 3.99mm
Radiation Hardening No
REACH SVHC No SVHC
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Supplier Device Package 8-SOIC
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2007
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 90mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Current Rating 1.25A
Base Part Number MIC2026

MIC2026-2YM Overview


The package is in the form of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.It owns General Purpose switch type.To ensure reliable operation, the temperature should be set to -40°C~85°C TA.There is a default setting of 2 for output.The LED driving board operates at Not Required volts.A maximum output voltage of N-Channel volts has been specified.Features of the lighting driver are Slew Rate Controlled, Status Flag.The MIC2026 family contains this object.It is necessary to use the 8 pins in order to operate the LED driver.In this case, the LED driving board can produce only 500mAV as its maximum output.The maximum output current drops to 500mA in order to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.In this LED driving board, there is 90mOhm resistance.When this case is used, the output current is set to 500mA.To choose from, there are 2 channels.It has a maximum input voltage of 5.5V volts.Input voltage must be at least 2.7V volts.It is designed to be stable at 85°C°C, which is the maximum operating temperature.The LED driver must work at a minimum temperature of -40°C degrees Celsius in order to remain reliable.As a result, it is only capable of handling voltages up to 5.5VV.It is possible to use a voltage as low as 2.7V V as a power supply voltage.

MIC2026-2YM Features


Resistance of 90mOhm
2 channels

MIC2026-2YM Applications


There are a lot of Microchip Technology MIC2026-2YM Power Switches ICs applications.

  • Portable Devices
  • Smartphone and PDA
  • PC Cards
  • Set-top-box
  • USB3.1 Power Delivery
  • Wearable Devices
  • Low Voltage I/O System Power
  • Notebook PC
  • USB Protection
  • USB Ports/Hubs

Write a review

Note: HTML is not translated!
    Bad           Good