MIC2026-2YM-TR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2026 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 1.63mm |
| Length | 5mm |
| Width | 3.99mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2026-2YM-TR Overview
Tape & Reel (TR) is how it's packaged.This package is included in 8-SOIC (0.154, 3.90mm Width).Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The LED driver has 2 outputs.The LED driving board operates with a supply voltage of Not Required.There is a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.It belongs to the MIC2026 family.8 pins are used for operation.In this case, the LED driving board can produce only 500mAV as its maximum output.The maximum output current must drop to 500mA to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.90mOhm resistance is present in the lighting driver.This LED driver can handle voltages up to 5.5V volts.The input voltage minimum is 2.7V volts.Stable operation is possible with a maximum operating temperature of 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.The greatest supply voltage it can handle is 5.5VV.Supply voltages as low as 2.7VV are possible.
MIC2026-2YM-TR Features
Resistance of 90mOhm
MIC2026-2YM-TR Applications
There are a lot of Microchip Technology MIC2026-2YM-TR Power Switches ICs applications.
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- Hot Swap
- Portable/Handheld Devices
- Smart Phones, Feature Phones
- Notebook and Tablet Computers
- Hot-Swap Systems
- Hard Disk Drives
- PC Card Hot Swap
- Gaming
