MIC2026A-1YM

N-Channel PMIC MIC2026 8 Pin 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2026A-1YM
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 465
Description: N-Channel PMIC MIC2026 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
Feature	Slew Rate Controlled, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	100mOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	MIC2026
Number of Outputs	2
Output Type	N-Channel
Max Output Current	500mA
Number of Channels	2
Voltage	5.5V
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Current - Output (Max)	500mA
Nominal Supply Current	5μA
Current	1.25A
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	5 ms
Switch Type	General Purpose
Nominal Input Voltage	5.5V
Turn-Off Delay Time	100 μs
Ratio - Input:Output	1:2
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ)	100mOhm
Height	1.48mm
Length	4.93mm
Width	3.94mm
Radiation Hardening	No
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MIC2026A-1YM Overview

It is packaged in the form of a Tube.Package 8-SOIC (0.154, 3.90mm Width) contains it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.It is recommended to set the temperature to -40°C~85°C TA in order to ensure reliable operation.The lighting driver is equipped with 2 outputs that can be used.To operate, it needs a supply voltage of Not Required.A maximum output voltage of N-Channel volts has been specified.A lighting driver with Slew Rate Controlled, Status Flag features is available.It is a member of the MIC2026 family.For operation, 8 pins are used.There is a maximum output of 500mAV from the LED driver.Maximum output current falls to 500mA when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.It has a resistance of 100mOhm.To choose from, there are 2 channels.It is designed to be stable at 85°C°C, which is the maximum operating temperature.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.If required, it can operate at 2.7V volts as well.