MIC2026A-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 500mA |
| Base Part Number | MIC2026 |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 2 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 20μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2026A-2YM Overview
Tube is how it's packaged.It's included in the 8-SOIC (0.154, 3.90mm Width) package.The mounting type of the LED driver is Surface Mount.General Purpose is the switch type it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.To operate, it needs a supply voltage of Not Required.It produces a maximum output voltage of N-Channel volts at its maximum output.There are Slew Rate Controlled, Status Flag features available on the LED driving board.This object belongs to the MIC2026 family.It is necessary to use the 8 pins in order to operate the LED driver.The lighting driver's maximum output is 500mAV.The maximum output current drops to 500mA in order to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.Currently, the LED driving board has a resistance of 140mOhm ohms.In total, there are 2 channels available.For stable operation, the maximum operating temperature should be 85°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.It can work with as low a supply voltage as feasible, such as 2.7VV.
MIC2026A-2YM Features
Resistance of 140mOhm
2 channels
MIC2026A-2YM Applications
There are a lot of Microchip Technology MIC2026A-2YM Power Switches ICs applications.
- PC Cards
- Portable/Handheld Devices
- Hard Disk Drives
- HDD and SSD
- Telecom and Network Systems
- Hot Swap
- Set-top-box
- Portable GPS
- Various applications equipped with buttons
- Portable Video Game Players
