MIC2027-2YM

N-Channel PMIC MIC2027 16 Pin 16-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2027-2YM
Package: 16-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 807
Description: N-Channel PMIC MIC2027 16 Pin 16-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	16-SOIC (0.154, 3.90mm Width)
Number of Pins	16
Supplier Device Package	16-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2006
Feature	Slew Rate Controlled, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	100mOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Current Rating	1.25A
Base Part Number	MIC2027
Number of Outputs	4
Output Voltage	6V
Output Type	N-Channel
Max Output Current	500mA
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Current - Output (Max)	500mA
Nominal Supply Current	10μA
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	5 ms
Switch Type	USB Switch
Min Input Voltage	2.7V
Max Input Voltage	5.5V
Nominal Input Voltage	5.5V
Turn-Off Delay Time	100 μs
Ratio - Input:Output	2 x 1:2
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ)	100mOhm
Height	1.64mm
Length	10mm
Width	3.99mm
REACH SVHC	No SVHC
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

MIC2027-2YM Overview

It is packaged in the form of a Tube.There is a 16-SOIC (0.154, 3.90mm Width) package that includes it.The LED driver is mounted as Surface Mount.There is a switch type of USB Switch.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.The LED driver is equipped with 4 outputs.The LED driving board operates at Not Required volts.It produces a maximum output voltage of N-Channel volts at its maximum output.It is equipped with Slew Rate Controlled, Status Flag features.I believe it belongs to the MIC2027 family.In order to operate, 16 pins are used.This lighting driver is capable of delivering a maximum output of 500mA volts.The maximum output current must drop to 500mA to meet the operation criteria.It is mounted in the way of Surface Mount.100mOhm is the resistance of the lighting driver.The maximum input voltage of the LED driver is 5.5V volts.The input voltage minimum is 2.7V volts.For stable operation, the maximum operating temperature should be 85°C°C.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.It can work with as low a supply voltage as feasible, such as 2.7VV.