MIC2027-2YWM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2006 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Resistance | 150mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2027 |
| Number of Outputs | 4 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 200μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | USB Switch |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 2 x 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 100mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2027-2YWM Overview
The package is in the form of a Tube.It's included in the 16-SOIC (0.295, 7.50mm Width) package.In this case, the LED driving board is mounted as Surface Mount.It owns USB Switch switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver has 4 outputs.The LED driving board operates at Not Required volts.A maximum voltage of N-Channel volts is available from the output of this LED driver.As far as features are concerned, the LED driving board has Slew Rate Controlled, Status Flag.I believe it belongs to the MIC2027 family.In order to operate, 16 pins are used.In this case, the LED driving board can produce only 500mAV as its maximum output.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.It is mounted in the way of Surface Mount.There is 150mOhm resistance on the LED driver.In order to ensure stable operation, a maximum operating temperature of 85°C°C should be maintained.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.It can also be used at 2.7Vvolts if needed.
MIC2027-2YWM Features
Resistance of 150mOhm
MIC2027-2YWM Applications
There are a lot of Microchip Technology MIC2027-2YWM Power Switches ICs applications.
- Hot Swaps
- Low Voltage I/O System Power
- Telecom and Network Systems
- Notebook and Tablet Computers
- Mobile Communication Devices
- USB Protection
- HDD and SSD
- Wearable Devices
- Set-top-box
- Portable Devices
