MIC2033-05AYM6-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Published | 2016 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2033-05AYM6-T5 Overview
A Cut Tape (CT) is used to package it.This file is included in package SOT-23-6.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.To ensure reliable performance, the temperature should be set to -40°C~125°C TJ.The LED driver has a total of 1 outputs.It uses a supply voltage of Not Required to operate.There is a maximum output voltage of P-Channel volts on this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It comes under the family of MIC2033.The 6 pins are used for the operation of the system.In terms of output, the lighting driver can provide a maximum of 500mA V.To meet the operation criteria, the maximum output current drops to 500mA.Surface Mount is mounted in the way of this lighting driver.The LED driver has 177mOhm resistance.For stable operation, the maximum operating temperature is 125°C°C.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.It can work with as low a supply voltage as feasible, such as 2.5VV.
MIC2033-05AYM6-T5 Features
Resistance of 177mOhm
MIC2033-05AYM6-T5 Applications
There are a lot of Microchip Technology MIC2033-05AYM6-T5 Power Switches ICs applications.
- Set-Top Boxes
- Portable GPS
- Set-top-box
- HDD, SSD
- Notebook and Tablet Computers
- Hard Disk Drives
- Mobile Communication Devices
- USB3.1 Power Delivery
- PC Cards
- USB Ports/Hubs
