MIC2033-08AYM6-T5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 800mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2033-08AYM6-T5 Overview
It is packaged in the manner of a Cut Tape (CT).It's included in the SOT-23-6 package.This LED driving board is mounted using the mounting type Surface Mount.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver has a total of 1 outputs that are available for use.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.Slew Rate Controlled, Status Flag features are available on the lighting driver.It belongs to the family MIC2033.The LED driver output is limited to 800mAV.The maximum output current is reduced to 800mA to meet the operation criteria.The LED driver has 177mOhm resistance.It is suitable for stable operation to operate at a maximum temperature of 125°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.It is possible to use a voltage as low as 2.5V V as a power supply voltage.
MIC2033-08AYM6-T5 Features
Resistance of 177mOhm
MIC2033-08AYM6-T5 Applications
There are a lot of Microchip Technology MIC2033-08AYM6-T5 Power Switches ICs applications.
- Wearable Devices
- Solid State Drivers
- Handheld Devices
- PC Cards
- Storage (HDDs, SSDs)
- Portable Devices
- Hot Swap
- Hot-Swap Systems
- Hot Swap
- Telecom and Network Systems
