MIC2033-08BYM6-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 800mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2033-08BYM6-T5 Overview
The package is in the form of a Tape & Reel (TR).It is included with the SOT-23-6 package as well.This lighting drivere has a mounting type of Surface Mount.This switch is of type General Purpose.To ensure reliable operation, the temperature should be set to -40°C~125°C TJ.The LED driver has 1 outputs.Operation is based on a supply voltage of Not Required.A maximum output voltage of P-Channel volts can be obtained with this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.There is a MIC2033 family of things that it belongs to.800mAV is the maximum output of the LED driver.To comply with the operation criteria, the maximum output current is reduced to 800mA.Currently, the LED driving board has a resistance of 177mOhm ohms.A maximum operating temperature of 125°C°C is required for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.It can handle a maximum voltage of 5.5VV.It is also capable of running at 2.5V volts if necessary.
MIC2033-08BYM6-T5 Features
Resistance of 177mOhm
MIC2033-08BYM6-T5 Applications
There are a lot of Microchip Technology MIC2033-08BYM6-T5 Power Switches ICs applications.
- USB Power Distribution
- Wireless Modem Data Cards
- Storage (HDDs, SSDs)
- HDD and SSD
- Solid State Drivers
- PDAs
- Hot Swap
- HDD, SSD
- Set-Top Boxes
- Smartphone and PDA
