MIC2033-08BYMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Supplier Device Package | 6-TDFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 800mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 800mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2033-08BYMT-T5 Overview
Tape & Reel (TR) is the way it's packaged.It is included with the 6-UFDFN Exposed Pad package as well.A Surface Mount mounting is used for the LED driving board.General Purpose is the switch type that it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~125°C TJ.There is a default setting of 1 for output.With a supply voltage of Not Required, the LED driving board operates.It has a maximum output voltage of P-Channel volts.It is equipped with Slew Rate Controlled, Status Flag features.It comes under the family of MIC2033.The LED driver output is limited to 800mAV.As a result, the maximum output current is reduced to 800mA in order to meet the operation requirements.Currently, the LED driving board has 177mOhm resistance.For stable operation, the maximum operating temperature should be 125°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.There is a maximum supply voltage of 5.5VV that it is capable of handling.A supply voltage of 2.5VV is sufficient for it to work.
MIC2033-08BYMT-T5 Features
Resistance of 177mOhm
MIC2033-08BYMT-T5 Applications
There are a lot of Microchip Technology MIC2033-08BYMT-T5 Power Switches ICs applications.
- Wireless Modem Data Cards
- Portable GPS Device
- Portable Devices
- HDD, SSD
- USB Power Distribution
- Low Voltage I/O System Power
- Portable/Handheld Devices
- HDD and SSD
- Notebook PC
- Handheld Devices
