MIC2033-10AYM6-T5
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Cut Tape (CT) |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2033-10AYM6-T5 Overview
Cut Tape (CT) is how it's packaged.There is a SOT-23-6 package that includes it.This lighting drivere has a mounting type of Surface Mount.General Purpose is the switch type that it owns.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.There is a default setting of 1 for output.Operation is based on Not Required supply voltage.There is a maximum output voltage of P-Channel volts on this LED driver.Features of the lighting driver are Slew Rate Controlled, Status Flag.This object belongs to the MIC2033 family.Its maximum output voltage is 1AV.This results in the maximum output current dropping to 1A to meet the operation criteria.177mOhm resistance is present in the lighting driver.It is designed to be stable at 125°C°C, which is the maximum operating temperature.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It is possible to use a voltage as low as 2.5V V as a power supply voltage.
MIC2033-10AYM6-T5 Features
Resistance of 177mOhm
MIC2033-10AYM6-T5 Applications
There are a lot of Microchip Technology MIC2033-10AYM6-T5 Power Switches ICs applications.
- Hot Swap
- USB Power Distribution
- Hard Disk Drives
- Portable Video Game Players
- USB Power Distribution
- Smartphone and PDA
- Wearable Devices
- Gaming
- HDD, SSD
- Portable GPS
