MIC2033-10BYMT-T5
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 6-UFDFN Exposed Pad |
| Supplier Device Package | 6-TDFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 125°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 1A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 1A |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| RoHS Status | ROHS3 Compliant |
MIC2033-10BYMT-T5 Overview
It is packaged in the form of a Tape & Reel (TR).It is included in the package 6-UFDFN Exposed Pad.This LED driving board is mounted using the mounting type Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~125°C TJ for reliable performance.The lighting driver is equipped with 1 outputs that can be used.To operate, it needs a supply voltage of Not Required.The maximum output voltage is P-Channel volts.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.The MIC2033 family contains this object.The maximum output of the LED driving board is 1AV.To meet the operation criteria, the maximum output current drops to 1A.In this case, there is 177mOhm resistance in the LED driving board.In order to ensure stable operation, a maximum operating temperature of 125°C°C should be maintained.To ensure reliability, it should operate at -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.It can operate at low supply voltages, such as 2.5V volts.
MIC2033-10BYMT-T5 Features
Resistance of 177mOhm
MIC2033-10BYMT-T5 Applications
There are a lot of Microchip Technology MIC2033-10BYMT-T5 Power Switches ICs applications.
- Various applications equipped with buttons
- HDD, SSD
- Portable/Handheld Devices
- Smartphone and PDA
- Wearable Devices
- Wireless/Networking Cards
- Solid State Drivers
- Portable GPS Device
- Hard Disk Drives
- PC Card Hot Swap
