MIC2033-55AYM6-T5
| Parameters | |
|---|---|
| Output Type | P-Channel |
| Max Output Current | 550mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 550mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| Height | 1.3mm |
| Length | 2.9mm |
| Width | 1.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Supplier Device Package | SOT-23-6 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2015 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 75mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
MIC2033-55AYM6-T5 Overview
It's?packaged?in?the way?of?a?Tape & Reel (TR).The SOT-23-6 package contains it.In this case, the LED driving board is mounted as Surface Mount.The switch type of this switch is General Purpose.To ensure reliable operation, set the temperature to -40°C~125°C TJ.There are 1 outputs available on this lighting driver.It uses a supply voltage of Not Required to operate.A maximum output voltage of P-Channel volts has been specified.Features of the lighting driver are Slew Rate Controlled, Status Flag.This object belongs to the MIC2033 family.In order to operate, the 6 pins are used.This LED driver has a maximum output of 550mAV.This results in the maximum output current dropping to 550mA to meet the operation criteria.Surface Mount is mounted in the way of this lighting driver.75mOhm is the resistance of the lighting driver.This LED driver can handle voltages up to 5.5V volts.Input voltage must be at least 2.5V volts.Keeping the operating temperature at 85°C°C ensures stable operation.Reliability is ensured by operating at a minimum working temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It can operate at 2.5V volts as well.The lighting driver is equipped with 1 inputs.
MIC2033-55AYM6-T5 Features
Resistance of 75mOhm
MIC2033-55AYM6-T5 Applications
There are a lot of Microchip Technology MIC2033-55AYM6-T5 Power Switches ICs applications.
- Notebook and Tablet Computers
- PDAs
- Notebook PC
- Smart Phones, Feature Phones
- Solid State Drivers
- Various applications equipped with buttons
- Wearable Devices
- Portable GPS Device
- PC Card Hot Swap
- Hot Swap
