MIC2033-55AYMT-T5
| Parameters | |
|---|---|
| Base Part Number | MIC2033 |
| Number of Outputs | 1 |
| Output Type | P-Channel |
| Max Output Current | 550mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.5V |
| Current - Output (Max) | 550mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 700 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.5V |
| Number of Inputs | 1 |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.5V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 75mOhm |
| Height | 500μm |
| Length | 2mm |
| Width | 2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 6-UDFN Exposed Pad |
| Number of Pins | 6 |
| Supplier Device Package | 6-TDFN (2x2) |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2016 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 177mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
MIC2033-55AYMT-T5 Overview
As a result, it is packaged in the form of a Tape & Reel (TR).The 6-UDFN Exposed Pad package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.The temperature should be set to -40°C~125°C TJ to ensure reliable functioning.As a default, the output is set to 1.The LED driving board operates at Not Required volts.Voltage output is P-Channel volts at maximum.A lighting driver with Slew Rate Controlled, Status Flag features is available.As you can see, it comes from the MIC2033 family.For operation, 6 pins are used.This LED driver has a maximum output of 550mAV.This results in the maximum output current dropping to 550mA to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.There is 177mOhm resistance on the LED driver.A maximum input voltage of 5.5V volts can be applied to it.A minimum input voltage of 2.5V volts is required for this LED driver.Keeping the operating temperature at 85°C°C ensures stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.It can work with as low a supply voltage as feasible, such as 2.5VV.The lighting driver is equipped with 1 inputs.
MIC2033-55AYMT-T5 Features
Resistance of 177mOhm
MIC2033-55AYMT-T5 Applications
There are a lot of Microchip Technology MIC2033-55AYMT-T5 Power Switches ICs applications.
- USB Ports/Hubs
- USB3.1 Power Delivery
- Notebook PC
- Wireless/Networking Cards
- USB Protection
- Portable Music Players
- HDD and SSD
- Portable GPS Device
- Hot Swaps
- PC Cards
