banner_page

MIC2039BYM6-T5

P-Channel PMIC MIC2039 6 Pin SOT-23-6


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2039BYM6-T5
  • Package: SOT-23-6
  • Datasheet: PDF
  • Stock: 651
  • Description: P-Channel PMIC MIC2039 6 Pin SOT-23-6 (Kg)

Details

Tags

Parameters
Min Supply Voltage 2.5V
Current - Output (Max) 2.5A
Nominal Supply Current 100μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Inverting
Turn On Delay Time 700 μs
Switch Type General Purpose
Turn-Off Delay Time 5 μs
Ratio - Input:Output 1:1
Voltage - Load 2.5V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Rds On (Typ) 75mOhm
RoHS Status ROHS3 Compliant
Lead Free Lead Free
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case SOT-23-6
Number of Pins 6
Supplier Device Package SOT-23-6
Operating Temperature -40°C~125°C TJ
Packaging Cut Tape (CT)
Published 2016
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 177mOhm
Max Operating Temperature 125°C
Min Operating Temperature -40°C
Base Part Number MIC2039
Number of Outputs 1
Output Type P-Channel
Max Output Current 2.5A
Interface On/Off
Max Supply Voltage 5.5V

MIC2039BYM6-T5 Overview


The package is in the form of a Cut Tape (CT).The SOT-23-6 package contains it.In this case, the LED driving board is mounted as Surface Mount.There is a switch type of General Purpose.Keeping the temperature at -40°C~125°C TJ ensures reliable operation.The LED driver has 1 outputs.A supply voltage of Not Required is required for it to operate.A maximum voltage of P-Channel volts is available from the output of this LED driver.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.It belongs to the MIC2039 family.The operation is carried out using the 6 pins.This lighting driver is capable of delivering a maximum output of 2.5A volts.This results in the maximum output current dropping to 2.5A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.It has 177mOhm resistance.Keeping the operating temperature at 125°C°C ensures stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.It can work with as low a supply voltage as feasible, such as 2.5VV.

MIC2039BYM6-T5 Features


Resistance of 177mOhm

MIC2039BYM6-T5 Applications


There are a lot of Microchip Technology MIC2039BYM6-T5 Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Portable Video Game Players
  • PC Card Hot Swap
  • Wireless/Networking Cards
  • Telecom and Network Systems
  • Handheld Devices
  • Various applications equipped with buttons
  • Hard Disk Drives
  • Storage Drives
  • Smart Phones, Feature Phones

Write a review

Note: HTML is not translated!
    Bad           Good