Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
SOT-23-6 |
Number of Pins |
6 |
Supplier Device Package |
SOT-23-6 |
Operating Temperature |
-40°C~125°C TJ |
Packaging |
Cut Tape (CT) |
Published |
2016 |
Feature |
Slew Rate Controlled, Status Flag |
Part Status |
Obsolete |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
177mOhm |
Max Operating Temperature |
125°C |
Min Operating Temperature |
-40°C |
Base Part Number |
MIC2039 |
Number of Outputs |
1 |
Output Type |
P-Channel |
Max Output Current |
2.5A |
Interface |
On/Off |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
2.5V |
Current - Output (Max) |
2.5A |
Nominal Supply Current |
100μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
700 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
5 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
2.5V~5.5V |
Fault Protection |
Current Limiting (Adjustable), Over Temperature, UVLO |
Rds On (Typ) |
75mOhm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
MIC2039EYM6-T5 Overview
The LED driver's packaged as a Cut Tape (CT).This file is included in package SOT-23-6.Mounting type Surface Mount is selected for the LED driving board.General Purpose is the switch type that it owns.It is best to set the temperature to -40°C~125°C TJ to ensure reliable operation.The lighting driver has a total of 1 outputs that are available for use.The LED driving board is powered by a voltage of Not Required.A maximum voltage of P-Channel volts is available from the output of this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.I believe it belongs to the MIC2039 family.During operation, the 6 pins are used.This lighting driver is capable of delivering a maximum output of 2.5A volts.Maximum output current falls to 2.5A when operation criteria are met.The lighting driver is mounted in the direction of Surface Mount.In this case, there is 177mOhm resistance in the LED driving board.A maximum operating temperature of 125°C°C is required for stable operation.In order to ensure reliability, it must operate at a minimum temperature of -40°C degrees Celsius.This LED driving board can handle voltages up to 5.5VV.It can work with as low a supply voltage as feasible, such as 2.5VV.
MIC2039EYM6-T5 Features
Resistance of 177mOhm
MIC2039EYM6-T5 Applications
There are a lot of Microchip Technology MIC2039EYM6-T5 Power Switches ICs applications.
- Wireless Modem Data Cards
- Hard Disk Drives
- HDD and SSD
- Set-Top Boxes
- USB Power Distribution
- HDD, SSD
- Wireless Headsets
- Solid State Drivers
- Portable/Handheld Devices
- Mobile Communication Devices