banner_page

MIC2040-1YMM

N-Channel PMIC MIC2040 10 Pin 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2040-1YMM
  • Package: 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
  • Datasheet: PDF
  • Stock: 680
  • Description: N-Channel PMIC MIC2040 10 Pin 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)
Number of Pins 10
Supplier Device Package 10-MSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
Feature Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 75mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2040
Number of Outputs 1
Output Voltage 6V
Output Type N-Channel
Max Output Current 1.5A
Number of Channels 1
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Current - Output (Max) 1.5A
Nominal Supply Current 250μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 1.6V~5.5V
Input Type Non-Inverting
Turn On Delay Time 800 μs
Switch Type General Purpose
Turn-Off Delay Time 5 μs
Ratio - Input:Output 1:1
Voltage - Load 0.8V~5.5V
Fault Protection Current Limiting (Adjustable), Over Temperature, UVLO
Rds On (Typ) 50mOhm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2040-1YMM Overview


As you can see, it's packaged in the way of a Tube.The 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package contains it.The LED driver is mounted as Surface Mount.General Purpose is the switch type that it owns.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The LED driver has 1 outputs.Operation is based on a supply voltage of 1.6V~5.5V.The maximum output voltage of this LED driver is N-Channel volts.It is equipped with Status Flag features.It belongs to the MIC2040 family.In order to operate, 10 pins are used.In terms of output, the lighting driver can provide a maximum of 1.5A V.It is necessary to reduce the maximum output current to 1.5A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.The LED driver has 75mOhm resistance.A total of 1 channels are available for you to choose from.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.You can also run it at 800mV volts if required.

MIC2040-1YMM Features


Resistance of 75mOhm
1 channels

MIC2040-1YMM Applications


There are a lot of Microchip Technology MIC2040-1YMM Power Switches ICs applications.

  • Low Voltage I/O System Power
  • Notebook and Tablet Computers
  • Smart Phones, Feature Phones
  • Storage (HDDs, SSDs)
  • Hard Disk Drives
  • Various applications equipped with buttons
  • PC Card Hot Swap
  • USB Protection
  • Wireless Headsets
  • HDD, SSD

Write a review

Note: HTML is not translated!
    Bad           Good