MIC2042-1YTS

N-Channel PMIC MIC2042 14 Pin 14-TSSOP (0.173, 4.40mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2042-1YTS
Package: 14-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 789
Description: N-Channel PMIC MIC2042 14 Pin 14-TSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	MIC2042
Number of Outputs	1
Output Voltage	6V
Output Type	N-Channel
Max Output Current	3A
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	800mV
Current - Output (Max)	3A
Nominal Supply Current	300μA
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	1.6V~5.5V
Input Type	Non-Inverting
Turn On Delay Time	1 ms
Switch Type	General Purpose
Turn-Off Delay Time	5 μs
Ratio - Input:Output	1:1
Voltage - Load	0.8V~5.5V
Fault Protection	Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO
Rds On (Typ)	40mOhm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	14-TSSOP (0.173, 4.40mm Width)
Number of Pins	14
Supplier Device Package	14-TSSOP
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2005
Feature	Slew Rate Controlled, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	60mOhm

MIC2042-1YTS Overview

As you can see, it's packaged in the way of a Tube.The 14-TSSOP (0.173, 4.40mm Width) package contains it.Mounting type Surface Mount is selected for the LED driving board.There is a General Purpose switch type associated with it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has 1 outputs.The LED driving board operates with a supply voltage of 1.6V~5.5V.A maximum output voltage of N-Channel volts can be achieved by this LED driver.There are Slew Rate Controlled, Status Flag features available on the LED driving board.It belongs to the MIC2042 family.In order to operate, the 14 pins are used.3AV is the maximum output of the LED driver.The maximum output current must drop to 3A to meet the operation criteria.The lighting driver is mounted in the direction of Surface Mount.In this case, there is 60mOhm resistance in the LED driving board.It is recommended that the maximum operating temperature be 85°C°C to ensure stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.It can operate at 800mV volts as well.