MIC2042-2YTS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Supplier Device Package | 14-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 60mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2042 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 3A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Current - Output (Max) | 3A |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1.6V~5.5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 40mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2042-2YTS Overview
Tube is the way it's packaged.It's included in the 14-TSSOP (0.173, 4.40mm Width) package.Surface Mount is the mounting type of the LED driver.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.In this LED driver, there are no outputs available.The LED driving board operates at 1.6V~5.5V volts.The maximum output voltage of this LED driver is N-Channel volts.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.It comes under the family of MIC2042.For operation, 14 pins are used.There is a maximum output of 3AV from the LED driver.To meet the operation criteria, the maximum output current drops to 3A.As a result, it is mounted in the manner of Surface Mount.Currently, the LED driving board has a resistance of 60mOhm ohms.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.It can operate at 800mV volts as well.
MIC2042-2YTS Features
Resistance of 60mOhm
MIC2042-2YTS Applications
There are a lot of Microchip Technology MIC2042-2YTS Power Switches ICs applications.
- Wireless/Networking Cards
- Handheld Devices
- USB3.1 Power Delivery
- PC Card Hot Swap
- Portable Music Players
- Solid-State Drives
- USB Power Distribution
- Portable Video Game Players
- Portable GPS Device
- Portable GPS
