MIC2043-2BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Base Part Number | MIC2043 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Interface | On/Off |
| Current - Output (Max) | 3A |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1.6V~5.5V |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 1.6V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Open Load Detect, Over Temperature, UVLO |
| Rds On (Typ) | 40mOhm |
| RoHS Status | Non-RoHS Compliant |
MIC2043-2BM Overview
As you can see, it's packaged in the way of a Tube.The 8-SOIC (0.154, 3.90mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.There is a switch type of General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.It is possible to use 1 outputs in the lighting driver.A supply voltage of 1.6V~5.5V is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It is part of the MIC2043 family of LED drivers.3AV is the maximum output of the LED driver.
MIC2043-2BM Features
MIC2043-2BM Applications
There are a lot of Microchip Technology MIC2043-2BM Power Switches ICs applications.
- Storage Drives
- Hot Swaps
- Gaming
- HDD and SSD
- Handheld Devices
- USB Ports/Hubs
- Wireless/Networking Cards
- Wireless Modem Data Cards
- Telecom and Network Systems
- Storage (HDDs, SSDs)
