banner_page

MIC2044-1YTS

N-Channel PMIC MIC2044 16 Pin 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2044-1YTS
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 600
  • Description: N-Channel PMIC MIC2044 16 Pin 16-TSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Supplier Device Package 16-TSSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
Feature Power Good, Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 30mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2044
Number of Outputs 1
Output Voltage 6V
Output Type N-Channel
Max Output Current 6A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Current - Output (Max) 6A
Nominal Supply Current 300μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 1.6V~5.5V
Input Type Non-Inverting
Turn On Delay Time 1.25 ms
Switch Type General Purpose
Turn-Off Delay Time 5 μs
Ratio - Input:Output 1:1
Voltage - Load 0.8V~5.5V
Fault Protection Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO
Rds On (Typ) 20mOhm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2044-1YTS Overview


It is package in Tube case.In the 16-TSSOP (0.173, 4.40mm Width) package, it is included.The mounting type of the LED driver is Surface Mount.The switch type of this switch is General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable operation.The lighting driver is equipped with 1 outputs that can be used.Operation is based on a supply voltage of 1.6V~5.5V.It has a maximum output voltage of N-Channel volts.This LED driving board is equipped with Power Good, Slew Rate Controlled, Status Flag features in order for it to be useful.The MIC2044 family consists of this type.In order to operate, 16 pins are used.6AV is the maximum output of the LED driver.This results in the maximum output current dropping to 6A to meet the operation criteria.This lighting driver is mounted in the way of Surface Mount.It has a resistance of 30mOhm.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.To ensure reliability, it should operate at -40°C degrees Celsius.A maximum supply voltage of 5.5VV can be handled by the LED driving board.If required, it can operate at 800mV volts as well.

MIC2044-1YTS Features


Resistance of 30mOhm

MIC2044-1YTS Applications


There are a lot of Microchip Technology MIC2044-1YTS Power Switches ICs applications.

  • Notebook and Tablet Computers
  • Telecom and Network Systems
  • Hot Swap
  • Storage (HDDs, SSDs)
  • PDAs
  • Smart Phones, Feature Phones
  • Low Voltage I/O System Power
  • USB3.1 Power Delivery
  • Smartphone and PDA
  • Solid-State Drives

Write a review

Note: HTML is not translated!
    Bad           Good