MIC2044-2YTS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Supplier Device Package | 16-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Feature | Power Good, Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 30mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2044 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 6A |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 800mV |
| Current - Output (Max) | 6A |
| Nominal Supply Current | 300μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | 1.6V~5.5V |
| Input Type | Non-Inverting |
| Turn On Delay Time | 1.25 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 5 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 0.8V~5.5V |
| Fault Protection | Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO |
| Rds On (Typ) | 20mOhm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2044-2YTS Overview
It's?packaged?in?the way?of?a?Tube.It is included with the 16-TSSOP (0.173, 4.40mm Width) package as well.It has been mounted as Surface Mount on the LED driver.There is a General Purpose switch type associated with it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.The LED driver is equipped with 1 outputs.With a supply voltage of 1.6V~5.5V, the LED driving board operates.The maximum output voltage is N-Channel volts.There are Power Good, Slew Rate Controlled, Status Flag features available on the LED driving board.It belongs to the family MIC2044.In order to operate, the 16 pins are used.From the lighting driver, there is a maximum output of 6AV.The maximum output current must drop to 6A to meet the operation criteria.As a result, it is mounted in the manner of Surface Mount.It has a resistance of 30mOhm.The maximum operating temperature of 85°C°C allows for stable operation.Reliability is assured with a minimum working temperature of -40°C degrees Celsius.It can handle a voltage of 5.5VV as its maximum supply voltage.You can also run it at 800mV volts if required.
MIC2044-2YTS Features
Resistance of 30mOhm
MIC2044-2YTS Applications
There are a lot of Microchip Technology MIC2044-2YTS Power Switches ICs applications.
- Portable/Handheld Devices
- Wireless/Networking Cards
- Mobile Communication Devices
- USB Ports/Hubs
- USB Protection
- Portable GPS
- PDAs
- Gaming
- Portable Devices
- Wearable Devices
