Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
16-TSSOP (0.173, 4.40mm Width) |
Number of Pins |
16 |
Supplier Device Package |
16-TSSOP |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tube |
Published |
2005 |
Feature |
Power Good, Slew Rate Controlled, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Resistance |
30mOhm |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Base Part Number |
MIC2045 |
Number of Outputs |
1 |
Output Voltage |
6V |
Output Type |
N-Channel |
Max Output Current |
6A |
Interface |
On/Off |
Max Supply Voltage |
5.5V |
Min Supply Voltage |
800mV |
Current - Output (Max) |
6A |
Nominal Supply Current |
400μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
1.6V~5.5V |
Input Type |
Non-Inverting |
Turn On Delay Time |
1.25 ms |
Switch Type |
General Purpose |
Turn-Off Delay Time |
5 μs |
Ratio - Input:Output |
1:1 |
Voltage - Load |
0.8V~5.5V |
Fault Protection |
Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO |
Rds On (Typ) |
20mOhm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2045-1YTS Overview
It is package in Tube case.In the 16-TSSOP (0.173, 4.40mm Width) package, it is included.A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.By default, it is set to output 1.Operation is based on 1.6V~5.5V supply voltage.The maximum output voltage of this LED driver is N-Channel volts.As far as features are concerned, the LED driving board has Power Good, Slew Rate Controlled, Status Flag.It belongs to the MIC2045 family.In order to operate, the 16 pins are used.The lighting driver's maximum output is 6AV.It is necessary to reduce the maximum output current to 6A to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has a resistance of 30mOhm ohms.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the system operates at a minimum temperature of -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.A supply voltage of 800mVV is sufficient for it to work.
MIC2045-1YTS Features
Resistance of 30mOhm
MIC2045-1YTS Applications
There are a lot of Microchip Technology MIC2045-1YTS Power Switches ICs applications.
- Solid State Drivers
- Portable Video Game Players
- Portable Music Players
- Hot Swaps
- PC Cards
- USB Power Distribution
- USB Power Distribution
- Portable GPS
- Portable Devices
- USB3.1 Power Delivery