banner_page

MIC2045-2YTS

N-Channel PMIC MIC2045 16 Pin 16-TSSOP (0.173, 4.40mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2045-2YTS
  • Package: 16-TSSOP (0.173, 4.40mm Width)
  • Datasheet: PDF
  • Stock: 873
  • Description: N-Channel PMIC MIC2045 16 Pin 16-TSSOP (0.173, 4.40mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 16-TSSOP (0.173, 4.40mm Width)
Number of Pins 16
Supplier Device Package 16-TSSOP
Operating Temperature -40°C~85°C TA
Packaging Tube
Published 2005
Feature Power Good, Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Resistance 30mOhm
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Base Part Number MIC2045
Number of Outputs 1
Output Voltage 6V
Output Type N-Channel
Max Output Current 6A
Interface On/Off
Max Supply Voltage 5.5V
Min Supply Voltage 800mV
Current - Output (Max) 6A
Nominal Supply Current 300μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) 1.6V~5.5V
Input Type Non-Inverting
Turn On Delay Time 1.25 ms
Switch Type General Purpose
Turn-Off Delay Time 5 μs
Ratio - Input:Output 1:1
Voltage - Load 0.8V~5.5V
Fault Protection Current Limiting (Adjustable), Open Load Detect, Over Temperature, Reverse Current, UVLO
Rds On (Typ) 20mOhm
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2045-2YTS Overview


Tube is the way it's packaged.There is a package for it in the 16-TSSOP (0.173, 4.40mm Width) package.The LED driver is mounted as Surface Mount.General Purpose is the switch type it owns.In order to guarantee reliable performance, the temperature should be set to -40°C~85°C TA.By default, it is set to output 1.A supply voltage of 1.6V~5.5V is required for it to operate.There is a maximum output voltage of N-Channel volts on this LED driver.Features of the lighting driver are Power Good, Slew Rate Controlled, Status Flag.It belongs to the MIC2045 family.For operation, 16 pins are used.The lighting driver's maximum output is 6AV.The maximum output current drops to 6A in order to meet the operation criteria.The lighting driver is mounted in the way of Surface Mount.Currently, the LED driving board has 30mOhm resistance.For stable operation, the maximum operating temperature is 85°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.As a result, it is only capable of handling voltages up to 5.5VV.A supply voltage of 800mVV is sufficient for it to work.

MIC2045-2YTS Features


Resistance of 30mOhm

MIC2045-2YTS Applications


There are a lot of Microchip Technology MIC2045-2YTS Power Switches ICs applications.

  • Portable GPS
  • USB Power Distribution
  • Storage Drives
  • Low Voltage I/O System Power
  • Telecom and Network Systems
  • Notebook PC
  • USB3.1 Power Delivery
  • USB Protection
  • Wireless/Networking Cards
  • Hot Swaps

Write a review

Note: HTML is not translated!
    Bad           Good