MIC2075-1BM
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | MM8™ |
| JESD-609 Code | e0 |
| Feature | Slew Rate Controlled, Status Flag |
| Pbfree Code | no |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | TIN LEAD |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.7V |
| Number of Channels | 1 |
| Interface | On/Off |
| Analog IC - Other Type | POWER SUPPLY SUPPORT CIRCUIT |
| Current - Output (Max) | 500mA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Adjustable Threshold | NO |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90m Ω |
| Length | 4.93mm |
| Width | 3.94mm |
| RoHS Status | Non-RoHS Compliant |
MIC2075-1BM Overview
A Tube is used to package it.It's included in the 8-SOIC (0.154, 3.90mm Width) package.Mounting type Surface Mount is selected for the LED driving board.It owns the General Purpose switch type.To ensure reliable operation, set the temperature to -40°C~85°C TA.As a default, the output is set to 1.The LED driving board is powered by a voltage of Not Required.There is a maximum output voltage of N-Channel volts on this LED driver.The lighting driver has Slew Rate Controlled, Status Flag features.It contains 8 terminations.The LED driving board has a total of 1 functions.From the lighting driver, there is a maximum output of 500mAV.It is possible to achieve a high level of efficiency with a supply voltage of 5V.This LED driver is equipped with a total of 8 pins.It is part of the MM8? series.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).In order for the lighting driver to operate normally, the supply voltage (Vsup) should be maintained above 2.7V.It uses an analog IC, which is POWER SUPPLY SUPPORT CIRCUIT.There are a total of 1 channels available.
MIC2075-1BM Features
Supplied from 5V
1 channels
MIC2075-1BM Applications
There are a lot of Rochester Electronics, LLC MIC2075-1BM Power Switches ICs applications.
- Mobile Communication Devices
- PC Cards
- Hard Disk Drives
- Storage Drives
- Solid State Drivers
- HDD and SSD
- Hot-Swap Systems
- USB Protection
- Notebook PC
- Wearable Devices
