MIC2075-1YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2075 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Number of Channels | 1 |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 160μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2075-1YMM Overview
The package is in the form of a Tube.The 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package includes it.In this case, the LED driving board is mounted as Surface Mount.General Purpose is the type of switch owned by it.Keeping the temperature at -40°C~85°C TA ensures reliable operation.It is possible to use 1 outputs in the lighting driver.Operation is based on Not Required supply voltage.A maximum output voltage of N-Channel volts can be achieved by this LED driver.In terms of features, the LED driving board has Slew Rate Controlled, Status Flag.It belongs to the MIC2075 family.In order to operate, 8 pins are used.This lighting driver is capable of delivering a maximum output of 500mA volts.Maximum output current falls to 500mA when operation criteria are met.The lighting driver is mounted in the way of Surface Mount.90mOhm is the resistance of the lighting driver.This electrical component can be found in the MM8? series.In total, 1 channels are available.There is a maximum input voltage of 5.5V volts.A voltage of 2.7V volts is the minimum input voltage.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.It is also capable of running at 2.7V volts if necessary.
MIC2075-1YMM Features
Resistance of 90mOhm
1 channels
MIC2075-1YMM Applications
There are a lot of Microchip Technology MIC2075-1YMM Power Switches ICs applications.
- Notebook PC
- Wireless Modem Data Cards
- Wireless/Networking Cards
- USB Ports/Hubs
- Handheld Devices
- Portable Music Players
- Smart Phones, Feature Phones
- Storage Drives
- Portable GPS
- Portable/Handheld Devices
