MIC2075-2YM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 90mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2075 |
| Number of Outputs | 1 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 5μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 μs |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 1.48mm |
| Length | 4.93mm |
| Width | 3.94mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2075-2YM Overview
It is package in Tube case.This package is included in 8-SOIC (0.154, 3.90mm Width).The mounting type of the LED driver is Surface Mount.The switch type is General Purpose.The temperature should be set to -40°C~85°C TA to ensure reliable functioning.By default, it is set to output 1.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.Slew Rate Controlled, Status Flag features are available on the lighting driver.The MIC2075 family consists of this type.For operation, 8 pins are used.The lighting driver's maximum output is 500mAV.This results in the maximum output current dropping to 500mA to meet the operation criteria.It is positioned in the direction of Surface Mount.It has a resistance of 90mOhm.It is part of the MM8? series.Its maximum input voltage is 5.5V volts.A minimum input voltage of 2.7V volts is required for this LED driver.The maximum operating temperature of 85°C°C allows for stable operation.To ensure reliability, the unit operates at a temperature of -40°C degrees Celsius.There is a maximum voltage of 5.5VV that it can handle.You can also run it at 2.7V volts if required.
MIC2075-2YM Features
Resistance of 90mOhm
MIC2075-2YM Applications
There are a lot of Microchip Technology MIC2075-2YM Power Switches ICs applications.
- Wireless Modem Data Cards
- Notebook PC
- HDD and SSD
- Portable/Handheld Devices
- Storage Drives
- USB Power Distribution
- Hot-Swap Systems
- Gaming
- Solid-State Drives
- Wireless/Networking Cards
