MIC2075-2YMM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-MSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2010 |
| Series | MM8™ |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 14mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Current Rating | 1.25A |
| Base Part Number | MIC2075 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 160μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 6 ms |
| Switch Type | General Purpose |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 5.5V |
| Nominal Input Voltage | 5.5V |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
| Rds On (Typ) | 90mOhm |
| Height | 920μm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
MIC2075-2YMM Overview
The package is in the form of a Tube.In the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, it is included.This lighting drivere has a mounting type of Surface Mount.General Purpose is the type of switch owned by it.It is best to set the temperature to -40°C~85°C TA to ensure reliable operation.In this LED driver, there are no outputs available.The LED driving board operates with a supply voltage of Not Required.A maximum voltage of N-Channel volts is available from the output of this LED driver.Slew Rate Controlled, Status Flag features are available on the lighting driver.It is part of the MIC2075 family of LED drivers.It is necessary to use the 8 pins in order to operate the LED driver.In terms of output, the lighting driver can provide a maximum of 500mA V.Maximum output current falls to 500mA when operation criteria are met.Surface Mount is mounted in the way.The LED driver has 14mOhm resistance.This electrical component is part of the MM8? series.As far as input voltage goes, its maximum is 5.5V volts.The input voltage minimum is 2.7V volts.A maximum operating temperature of 85°C°C is required for stable operation.To ensure reliability, it should operate at -40°C degrees Celsius.5.5VV is the maximum supply voltage it can handle.A supply voltage of 2.7VV is sufficient for it to work.
MIC2075-2YMM Features
Resistance of 14mOhm
MIC2075-2YMM Applications
There are a lot of Microchip Technology MIC2075-2YMM Power Switches ICs applications.
- USB3.1 Power Delivery
- Portable Devices
- Set-top-box
- Notebook and Tablet Computers
- Hard Disk Drives
- Solid State Drivers
- USB Ports/Hubs
- Gaming
- USB Power Distribution
- Wireless Modem Data Cards
