banner_page

MIC2076-1YM-TR

N-Channel PMIC MIC2076 8 Pin 8-SOIC (0.154, 3.90mm Width)


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-MIC2076-1YM-TR
  • Package: 8-SOIC (0.154, 3.90mm Width)
  • Datasheet: PDF
  • Stock: 352
  • Description: N-Channel PMIC MIC2076 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mount Surface Mount
Mounting Type Surface Mount
Package / Case 8-SOIC (0.154, 3.90mm Width)
Number of Pins 8
Operating Temperature -40°C~85°C TA
Packaging Tape & Reel (TR)
Published 2010
JESD-609 Code e4
Feature Slew Rate Controlled, Status Flag
Part Status Active
Moisture Sensitivity Level (MSL) 1 (Unlimited)
Number of Terminations 8
ECCN Code EAR99
Resistance 140mOhm
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Current Rating 1.25A
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number MIC2076
Number of Outputs 2
Output Voltage 6V
Output Type N-Channel
Max Output Current 500mA
Interface On/Off
Nominal Supply Current 5μA
Output Configuration High Side
Voltage - Supply (Vcc/Vdd) Not Required
Input Type Non-Inverting
Turn On Delay Time 5 μs
Switch Type General Purpose
Nominal Input Voltage 5.5V
Turn-Off Delay Time 100 μs
Ratio - Input:Output 1:2
Voltage - Load 2.7V~5.5V
Fault Protection Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ) 90m Ω
Height Seated (Max) 1.73mm
Length 4.93mm
Width 3.94mm
Radiation Hardening No
RoHS Status ROHS3 Compliant
Lead Free Lead Free

MIC2076-1YM-TR Overview


As you can see, it's packaged in the way of a Tape & Reel (TR).There is a package for it in the 8-SOIC (0.154, 3.90mm Width) package.The lighting driver is mounted in the Surface Mount position.It owns the General Purpose switch type.Ensure reliable operation by setting the temperature to -40°C~85°C TA.The LED driver is equipped with 2 outputs.The LED driving board operates at Not Required volts.There is a maximum output voltage of N-Channel volts.Currently, the LED driving board is equipped with Slew Rate Controlled, Status Flag features.I believe it belongs to the MIC2076 family.A total of 8 terminations have been found in it.In order to operate, 8 pins are used.It consists of 1 functions.As a result, the maximum output current is reduced to 500mA in order to meet the operation requirements.Surface Mount is mounted in the way of this lighting driver.There is 140mOhm resistance on the LED driver.

MIC2076-1YM-TR Features


Resistance of 140mOhm

MIC2076-1YM-TR Applications


There are a lot of Microchip Technology MIC2076-1YM-TR Power Switches ICs applications.

  • PC Cards
  • Various applications equipped with buttons
  • Portable Music Players
  • Portable Video Game Players
  • Wireless Modem Data Cards
  • Notebook PC
  • Gaming
  • Portable GPS Device
  • Portable GPS
  • Wireless/Networking Cards

Write a review

Note: HTML is not translated!
    Bad           Good