Parameters |
Factory Lead Time |
1 Week |
Mount |
Surface Mount |
Mounting Type |
Surface Mount |
Package / Case |
8-SOIC (0.154, 3.90mm Width) |
Number of Pins |
8 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
Published |
2010 |
JESD-609 Code |
e4 |
Feature |
Slew Rate Controlled, Status Flag |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
8 |
ECCN Code |
EAR99 |
Resistance |
140mOhm |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Number of Functions |
1 |
Supply Voltage |
5V |
Current Rating |
1.25A |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
MIC2076 |
Number of Outputs |
2 |
Output Voltage |
6V |
Output Type |
N-Channel |
Max Output Current |
500mA |
Supply Voltage-Max (Vsup) |
5.5V |
Interface |
On/Off |
Nominal Supply Current |
20μA |
Output Configuration |
High Side |
Voltage - Supply (Vcc/Vdd) |
Not Required |
Input Type |
Non-Inverting |
Turn On Delay Time |
5 μs |
Switch Type |
General Purpose |
Turn-Off Delay Time |
100 μs |
Ratio - Input:Output |
1:2 |
Voltage - Load |
2.7V~5.5V |
Fault Protection |
Current Limiting (Fixed), Over Temperature, UVLO |
Turn On Time |
5000 μs |
Output Peak Current Limit-Nom |
0.9A |
Rds On (Typ) |
90m Ω |
Built-in Protections |
OVER CURRENT; THERMAL; UNDER VOLTAGE |
Output Current Flow Direction |
SINK |
Height Seated (Max) |
1.73mm |
Length |
4.93mm |
Width |
3.94mm |
Radiation Hardening |
No |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
MIC2076-2YM-TR Overview
It is package in Tape & Reel (TR) case.It is included in the package 8-SOIC (0.154, 3.90mm Width).In this case, the LED driving board is mounted as Surface Mount.The switch type is General Purpose.Keeping the temperature at -40°C~85°C TA ensures reliable operation.The LED driver has a total of 2 outputs.A voltage of Not Required is used to power it.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.It belongs to the family MIC2076.It consists of 8 terminations in total.In order to operate, 8 pins are used.It consists of 1 functions.The maximum output current drops to 500mA in order to meet the operation criteria.High efficiency is possible at 5V supply voltage.The LED driving board is mounted in the way of Surface Mount.It has 140mOhm resistance.This LED driver is configured to have a maximum supply voltage of 5.5V (Vsup).
MIC2076-2YM-TR Features
Supplied from 5V
Resistance of 140mOhm
MIC2076-2YM-TR Applications
There are a lot of Microchip Technology MIC2076-2YM-TR Power Switches ICs applications.
- USB3.1 Power Delivery
- Hot Swap
- Solid-State Drives
- Portable GPS Device
- Wearable Devices
- Wireless Modem Data Cards
- Handheld Devices
- HDD and SSD
- Notebook and Tablet Computers
- Smart Phones, Feature Phones