MIC2076A-1YM

N-Channel PMIC MIC2076A 8 Pin 8-SOIC (0.154, 3.90mm Width)

Manufacturer: Microchip Technology
Nocochips NO: 536-MIC2076A-1YM
Package: 8-SOIC (0.154, 3.90mm Width)
Datasheet: PDF
Stock: 837
Description: N-Channel PMIC MIC2076A 8 Pin 8-SOIC (0.154, 3.90mm Width) (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Mount	Surface Mount
Mounting Type	Surface Mount
Package / Case	8-SOIC (0.154, 3.90mm Width)
Number of Pins	8
Supplier Device Package	8-SOIC
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Published	2009
Feature	Slew Rate Controlled, Status Flag
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Resistance	140mOhm
Max Operating Temperature	85°C
Min Operating Temperature	-40°C
Base Part Number	MIC2076A
Number of Outputs	2
Output Type	N-Channel
Max Output Current	500mA
Interface	On/Off
Max Supply Voltage	5.5V
Min Supply Voltage	2.7V
Current - Output (Max)	500mA
Nominal Supply Current	100μA
Output Configuration	High Side
Voltage - Supply (Vcc/Vdd)	Not Required
Input Type	Non-Inverting
Turn On Delay Time	5 ms
Switch Type	General Purpose
Turn-Off Delay Time	100 μs
Ratio - Input:Output	1:2
Voltage - Load	2.7V~5.5V
Fault Protection	Current Limiting (Fixed), Over Temperature, UVLO
Rds On (Typ)	100mOhm
RoHS Status	ROHS3 Compliant

MIC2076A-1YM Overview

As you can see, it's packaged in the way of a Tube.This file is included in package 8-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.It owns the General Purpose switch type.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.A supply voltage of Not Required is required for it to operate.A maximum output voltage of N-Channel volts can be obtained with this LED driver.This LED driving board is equipped with Slew Rate Controlled, Status Flag features in order for it to be useful.The MIC2076A family consists of this type.In order to operate, the 8 pins are used.In terms of output, the lighting driver can provide a maximum of 500mA V.Maximum output current falls to 500mA when operation criteria are met.In this case, it is mounted in the way of Surface Mount.It has 140mOhm resistance.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.A minimum working temperature of -40°C degrees Celsius is required to ensure its reliability.As a result, it is only capable of handling voltages up to 5.5VV.It can operate at 2.7V volts as well.