MIC2076A-2YM
| Parameters | |
|---|---|
| Rds On (Typ) | 100mOhm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Supplier Device Package | 8-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Feature | Slew Rate Controlled, Status Flag |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Resistance | 140mOhm |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Base Part Number | MIC2076A |
| Number of Outputs | 2 |
| Output Type | N-Channel |
| Max Output Current | 500mA |
| Interface | On/Off |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Current - Output (Max) | 500mA |
| Nominal Supply Current | 100μA |
| Output Configuration | High Side |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Turn On Delay Time | 5 ms |
| Switch Type | General Purpose |
| Turn-Off Delay Time | 100 μs |
| Ratio - Input:Output | 1:2 |
| Voltage - Load | 2.7V~5.5V |
| Fault Protection | Current Limiting (Fixed), Over Temperature, UVLO |
MIC2076A-2YM Overview
Tube is how it's packaged.The 8-SOIC (0.154, 3.90mm Width) package includes it.A Surface Mount mounting is used for the LED driving board.This switch is of type General Purpose.It is recommended that the temperature be set to -40°C~85°C TA for reliable performance.There is a default setting of 2 for output.In order to operate, it requires a voltage supply of Not Required.It has a maximum output voltage of N-Channel volts.Slew Rate Controlled, Status Flag features are available on the lighting driver.There is a MIC2076A family of things that it belongs to.In order to operate, the 8 pins are used.Its maximum output voltage is 500mAV.The maximum output current must drop to 500mA to meet the operation criteria.140mOhm is the resistance of the lighting driver.It is suitable for stable operation to operate at a maximum temperature of 85°C°C.Ensure reliability by operating at a minimum temperature of -40°C degrees Celsius.In addition to 5.5VV, it can handle other voltages as well.It can operate at low supply voltages, such as 2.7V volts.
MIC2076A-2YM Features
Resistance of 140mOhm
MIC2076A-2YM Applications
There are a lot of Microchip Technology MIC2076A-2YM Power Switches ICs applications.
- Hot-Swap Systems
- Notebook PC
- PC Card Hot Swap
- Hot Swap
- Handheld Devices
- Mobile Communication Devices
- PDAs
- Wireless Modem Data Cards
- Portable GPS
- Wireless/Networking Cards
